Singer EM9305 - Needle Threader 2:6; Cutting the Thread 2:6

1. 2.
3.
4.
A
B
C
5.
1
2:6
NEEDLE THREADER
Theneedlemustbeintheuppositiontousethebuilt-inneedle
threader.Wealsorecommendloweringthepresserfoot.
1. Usethehandletopulltheneedlethreaderalltheway
down,catchingthethreadundertheguide(A).
2. Pushbacktobringtheneedlethreaderforwarduntilthe
metalangescovertheneedle.Asmallhookwillpass
throughtheneedleeye(B).
3. Placethethreadundertheangesinfrontoftheneedle,so
thethreadcatchesintothesmallhook(C).
4. Lettheneedlethreadergentlyswingback.Thehookpulls
thethreadthroughtheneedleeyeandformsaloopbehind
the needle.
5. Pullthethreadloopoutbehindtheneedle.
Note: The needle threader is designed to be used for size 70-
110 needles. You cannot use the needle threader for size 60
needles or smaller.
When threading the needle manually, make sure that the needle
isthreadedfromfronttoback.Thewhitepresserfootankle
makesiteasytoseetheeyeoftheneedle.Thebobbincase
covercanbeusedasamagnifyingglass.
CUTTING THE THREAD
Onceyouhavenishedembroidering,thethreadsarecut
automaticallybytheselectivethreadcutter.
Ifyouwanttocutthethreadsmanually,youmustrstdeselect
SelectiveThreadCutterAutointheEmbroiderySettings,see
page3:6.Then,presstheselectivethreadcutterbutton(1)on
the machine to cut the threads.
Alternatively,youcanusethethreadcutterontheleftsideof
themachine.Pullthethreadsfromthefronttothebackintothe
threadcutterontheleftsideofthemachine.