© Mar. 2023
16 AB16EJ Plus Maintenance Manual
TECHNICAL CHARACTERISTICS
Table 3-13 (Continued)
Component Metric (kg) Imperial (lb)
Downward leveling cylinder
34 75
Main boom lift cylinder
75 165
Articulated boom lift cylinder
76 168
Jib boom cylinder
31 68
Swing cylinder
41 90
Slewing reducer
105 231
Travel reducer 41 90
Travel motor 26 57
Hybrid motor
27 60
Tire assembly
161 355
Note: The weight of certain components will vary with the options configured on the machine.
3.5 PRESSURE REQUIREMENTS
Table 3-14
Movement
Maximum pressure
Steer
16MPa (2611psi)
Turntable rotation
12MPa (2176psi)
3.6 OIL REQUIREMENTS
NOTICE
• Please choose appropriate oil according to the
ambient temperature and local regulations, and
the use of unqualified oil will damage the machine
components.
• Oils of different grades or viscosities should not be
mixed. The oil to be added must have the same
grade and viscosity as that of the oil being used by
the machine.
• If special oil is required by the environments or
users, please contact Sinoboom.
• Before filling oil, wait until the temperature of
the machine drops to room temperature, other-
wise it may cause splashes, burns or other
personal injury.
• It is strictly forbidden to use inferior oils. The
use of inferior oils will bring damage to the ma-
chine, and the resulting failure will not be guar-
anteed by Sinoboom.
To Next Page
Loading...
