EasyManua.ls Logo

Sinoboom AB16EJ Plus - 3 Responsibilities of Relevant Parties; Owners (or Lessors); Responsibilities; Employersresponsibilities

Sinoboom AB16EJ Plus
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AB16EJ Plus Operation Manual
17
© March 2023
3 RESPONSIBILITIES OF RELEVANT
PARTIES
3.1 OWNER’S (OR LESSOR’S)
RESPONSIBILITIES
The owner (or lessor) is obliged to help the user
understand all the instructions in the manual.
The owner (or lessor) should provide the latest man-
uals or replace missing or damaged decals. To ob-
tain the most current machine manuals please
contact Sinoboom or its authorized agents.
The owner (or lessor) should comply with local regu-
latory requirements related to the use of the
machine.
3.2 EMPLOYER’S
RESPONSIBILITIES
The employer must ensure that the operators is
properly trained and qualified to operate the
machine.
The employer should ensure that the user is healthy
and has good judgment, sense of cooperation and
psychological qualities.
The employer has the responsibility to ensure that
signalmen have good visual and auditory judgment,
master standard command signals and send clear
and accurate signals, and have sufficient experience
to identify hazards and inform operators to avoid
hazards in time.
The employer should clarify the corresponding
safety responsibilities to each operator and require
them to report unsafe factors to the supervisor
timely.
3.3 TRAINER’S RESPONSIBILITIES
The trainer must be accredited by Sinoboom, have
comprehensive knowledge training on the machine,
and must have the required skills related to machine
repair and maintenance.
The trainer must conduct training in an open area
free of hazards until the trainees acquire the ability
to safely control and operate the machine.
3.4 USER’S RESPONSIBILITIES
The user must be properly trained on MEWP, and
authorized.
The user must carefully read and fully understand
this manual and the decals on the machine.
The user must report to the owner (lessor) all
anomalies that may cause the machine to work ab-
normally or have potential dangers, and if possible,
correct the abnormal situation promptly while ensur-
ing safety.
The user must be fully aware of the content and pro-
cedures of the respective operation.
The user must be familiar with and comply with sig-
nal instructions and operation requirements in emer-
gency situations.
The user must be vigilant in observing for any haz-
ardous conditions and promptly report any dangers
to other operators and signal personnel. This in-
cludes situations such as high-voltage lines, unre-
lated personnel, and unfavorable ground conditions.
The user must stop using the equipment if it is not
functioning properly or if a hazardous condition
arises.

Table of Contents

Other manuals for Sinoboom AB16EJ Plus

Related product manuals