1. When the printing is complete and the print has cooled down, “You can now remove
the print from printer” message will appear on the screen. Click “DONE” to complete
the printing process and open the printer.
IMPORTANT!
The blockade of the device is engaged up until the internal temperature drops
below 49 [⁰C].
There is no possibility to open the lid before the temperature drops.
Remember that the print inside the printer may still be hot, despite the fact
that the printer has cooled down!
2. In order to open the printer, unlock the magnetic lock on the lid.The lock releases the
blockade for 10 seconds. After 10 seconds the lock will become active again. Softly press the
lid and then lift it by pulling up.
IMPORTANT! Put on the safety clothing
included in the set (mask, glasses, gloves).
37 Sinterit Lisa USER MANUAL
To Next Page
Loading...
