- When the PA12 Smooth powder gets in contact to your skin, wash it
with soap and water.
● Polyamide powder should be stored in tightly closed containers, in a room at room
temperature and low humidity.
● Powder should be stored out of reach of children and pets.
● If the device is not used for a long time, the powder should be stored in a sealed
package.
● When printing, the smell of burning powder may be emitted in intensities which do not
affect the health of users. However, in the case of long-term operation of the printer in
a poorly ventilated room, the smell may become unpleasant and irritating. Adequate
ventilation is recommended in order to create the best printing conditions.
WARNING!
Do not attempt to burn/melt polyamide powder. The resulting sparks and hot
mass can cause severe burns.
Keep the polyamide powder away from fire.
STOP!
Do not dispose in municipal waste!
The used polyamide powder should be stored in sealed containers and
disposed in accordance with local policy of waste plastic material.
B. General information
PA12 SMOOTH
● PA12 Smooth is a black, polyamide
based, nylon 12 powder, consisting of
20-100 micrometers size spherical
particles. It is suitable for printing
detailed objects, rigid and extremely
durable against unfavourable
conditions (such as temperature). Due
to its mechanical strength and heat
resistance, it is a powder dedicated for
functional prototypes or end-use parts.
● The sintering temperature with Sinterit
Lisa is about 178[°C] inside the printing
chamber.
69 Sinterit Lisa USER MANUAL
To Next Page
Loading...
