Skyjack SJ20 Service Manual

102
SJ20238886ABA
Section 5 – Procedures Wear Pad Replacement
4. Use new pop rivets to attach two new thick and
long wear pads (234171) to the front of the mast.
5. Pull the mast cable out of mast 1 and lower it
between mast 4 and mast 5.
6. Use the screws removed earlier to mount the
mast electrical housing to the side of mast 5.
7. Use new pop rivets and the washers removed
earlier to mount the AC outlet box to the side of
mast 5.

Skyjack SJ20 Specifications

General

Brand	Skyjack
Model	SJ20
Category	Lifting Systems
Language	English