Skyjack SJ20 Service Manual

97
SJ20 238886ABA
Section 5 – ProceduresWear Pad Replacement
5.13-4 Replace the top wear pads
1. Remove and discard the wear pads at the top of
mast 1.
2. Use new pop rivets to attach two new thick and
short wear pads (234170) to the front of the mast.
3. Use new pop rivets to attach two new thin and
long wear pads (234168) to the rear of the mast.
4. Repeat steps 2 and 3 for masts 2 through 4.

Skyjack SJ20 Specifications

General

Brand	Skyjack
Model	SJ20
Category	Lifting Systems
Language	English