Skyjack SJ30ARJE User Manual

17
SJ30AJE, SJ30ARJE 196274AF
Pre-Delivery/Maintenance Inspection Checklist Section 1 – Scheduled Maintenance
Serial Number:
Product Owner:
Model:
Hourmeter Reading:
Product User:
Date/Time:
q
PDI B P - Pass
q
Frequent B F - Fail
q
Annual B + C R - Repaired
q
Additional *
N/A - Not Applicable
Items for Inspection P F R
N/A
Items for Inspection P F R
N/A
B, C B
B B
B
B
B
B
B
B B
B
B
B
B
B
Comments:
B
Steer Cylinder Assembly. Secure and no missing parts.
Tight fittings and hoses. No leaks.
Check the appropriate box as each item is inspected. If an item is found to be not acceptable, please describe the issue in the comments box provided.
Refer to www.skyjack.com for the latest service bulletins.
Ensure Annual Inspection has been completed within the
last 13 months.
Labels. In place, secure and legible.
Limit Switches. Secure. No obstructions or damage.
Batteries. No damage, tight connections, adequate fluid
levels. Clean terminals and cable ends.
Hydraulic Tank. Filler cap secure and no damage or
leaks.
B
Battery Charger. Secure and no damage.
Boom. No damage or missing parts. No deformation or
cracks in welds. Tight hoses and bolts and no leaks.
Electric Articulating Booms
Pre-Delivery/Maintenance Inspection Checklist
B, C
B
Cylinders. Secure and no damage or leaks.
Platform Control Console. Switches in neutral position
and secure. No damage or missing parts.
Platform Assembly. No damage or missing parts.
B
B
C - Perform Scheduled Maintenance Inspections every year. For further details refer to Service & Operating Manuals.
B - Perform PDI prior to each delivery or Frequent Inspections every 3 months or 150 hrs. For further details refer to
Service & Operating Manuals.
Inspection Type Schedule
Use this form for Pre-Delivery Inspections (PDI) prior to each rental, lease or sale, or as a guide for all Frequent Inspections and Annual Inspections. Refer to
the applicable Operating and Service Manuals for inspection details (eg. Visual Inspection and Function Tests, Torque Specs., Engine Oil, Chain Inspection
Intervals, etc.).
Pins & Bushings. No damage/wear, or loose or missing
parts.
B
B
Main Power Connectors. Cables secure and in working
order. No damage or missing parts.
B
B
Hydraulic Pump/Motor. Tight fittings, hoses and bolts.
No damage, missing parts or leaks.
Wheel Motors. Secure. No damage or missing parts.
B
B
Emergency Power Unit. Tight fittings and hoses. No
leaks. Tight wire connections and no damage or missing
parts.
B
SGE. Secure. No damage or missing parts.
Tie Rod. No damage/wear or missing parts.
Pothole Protection. No cracks, damage or deformation.
Hydraulic Filter. Secure and no damage, missing parts
or leaks.
B, C
Manuals & Required Documents. In storage box, in
good condition and legible.
B
B
Battery Trays. Latches and lids are secure. No missing
parts.
Torque Hubs. Secure, and no damage or missing parts.
Tight fittings, hoses and bolts. No leaks.
B
Riser. Secure and no damage/deformation or missing parts.
Wear Pads. No damage or missing parts. Bolts tightened.
Jib. No damage or missing parts. Tight hoses and bolts and
no leaks.
B
Platform Rotary Actuator. No damage or missing parts.
Tight fittings, hoses and bolts and no leaks.
Turret Rotation Motor/Gear. Tight fittings, hoses and
bolts. No damage, missing parts or leaks.
Hydraulic Oil. Level between min. and max. marks.
B
E-Chain. No damage or missing parts.
Special Options and Approved Attachments. Secure
and no damage or missing parts.
Electrical Panel. Secure and no damage. Tight wire
connections and fasteners.
Control Cables and Hoses. No damage or missing parts.
Jib Rotary Actuator. No damage or missing parts. Tight
fittings, hoses and bolts, and no leaks.
The undersigned confirms that all areas listed have been inspected, and any and all discrepancies have been brought to the attention of the owner.
Furthermore, the undersigned confirms that all discrepancies have been corrected prior to using this machine.
Date (DD/MM/YY)
Date (DD/MM/YY)
Wheel/Tire Assembly. Check all tires for damage, wear
& proper alignment. Lug nuts torqued as recommended.
B, C
Base Weldment. No cracks or deformation.
Print Name
Print Name
User: __________________________________________ / __________________________________________ / __________________________________________
Owner: __________________________________________ / __________________________________________ / __________________________________________
Signature
Signature
q
q
PASS
FAIL
Function Tests. Refer to the corresponding Operating Manual
for your serial number for information on running these tests.
* - Perform time sensitive maintenance intervals. Refer to the Service Manual.
B
Raillings and Gate. Secure and no damage or missing
parts.
B
Base Control Console. Switches in neutral position and
no damaged or missing parts.
B, C
Main Manifold. Tight fittings and hoses and no leaks.
Tight wire connections.
Note: Visit www.skyjack.com for a printable copy of this form.
210016AA
1.5 Pre-Delivery/Maintenance Inspection Checklist

Skyjack SJ30ARJE Specifications

General

Brand	Skyjack
Model	SJ30ARJE
Category	Boom Lifts
Language	English