34
SJ30AJE, SJ30ARJE196274AF
Section 2 – Maintenance Tables and Diagrams Floor Loading Pressure
2.8 Floor Loading PressureTable
lb. kg lb. kg psi kPa psf kPa
ANSI/CSA 15,080 6,840 7,750 3,515 236 1,627 530 25.4
ANSI/CSA 15,080 6,840 7,750 3,515 236 1,627 530 25.4
CE & KC 13,177 5,977 7,176 3,255 218 1,505 464 22.2
AS 12,824 5,817 7,176 3,255 218 1,505 451 21.6
1212AA
n
n
n
NOTE:
The LCP or OUP that an individual surface can withstand varies from structure to structure and is generally determined by the engineer or
architect for that particular structure.
LCP – Locally Concentrated Pressure – is a measure of how hard the aerial platform tire tread presses on the area in direct contact with the
floor. The floor covering (tile, carpet, etc.) must be able to withstand more than the indicated values above.
OUP – Overall Uniform Pressure – is a measure of the average load the aerial platform imparts on the whole surface projected directly
underneath it. The structure of the operating surface (beams, etc.) must be able to withstand more than the indicated values above.
Gross Aerial Platform Weight = Weight + platform capacity
SJ30ARJE
SJ30AJE
STANDARDMODEL
Gross Aerial Platform
Weight
Total Aerial Platform Load
Wheel Load LCP OUP
Locally Concentrated Pressure (LCP):
Foot Print Area identified by test.
LCP =
Wheel Load
Foot Print Area
Overall Uniform Pressure (OUP):
Base Area = Length x Width
OUP =
Weight of MEWP + Capacity
Base Area
Foot Print Area
Base Width
Base Length
To Next Page
Loading...
Need help?
General
