Damage to the product due to condensation
If the product is moved from a cold environment to a warm environment, condensation may form
in the product.
• When there is a large temperature difference, wait for the product to reach room
temperature before connecting to the voltage supply.
Radio-controlled socket
Danger to life due to electric shock
Lethal voltages are present in the live components.
• Only use the radio-controlled socket indoors and in a dry environment (e.g. not in damp
rooms) and keep away from liquids.
• Only insert suitable plugs into the radio-controlled socket.
• Unplug the radio-controlled socket from the outlet prior to cleaning and clean with a dry
cloth only.
• If the radio-controlled socket is damaged, disconnect the wall outlet into which the radio-
controlled socket is plugged from voltage sources (via the household distribution board)
and replace the radio-controlled socket with a new one.
• Never open the radio-controlled socket.
Risk of injury and fire due to unintentional and unattended switching on of loads
Loads that are switched on via a radio-controlled socket unintentionally and while unattended can
cause injuries and fires (e.g. an iron).
• Do not connect any loads to the radio-controlled socket that could endanger persons or
cause damage if unintentionally switched on.
Risk of injury due to incorrect cable routing
Incorrectly routed cables can pose a tripping hazard and cause injuries.
• Route the cables in such a way that no one can step on or trip over them.
Damage to the radio-controlled socket
The radio-controlled socket can become damaged through incorrect operation.
• Do not operate radio-controlled sockets when they are plugged into each other.
2 Safety
SMA Solar Technology AG
Installation Manual 11HoMan-IA-en-20
To Next Page
Loading...
