SMA sunny home manager - Device Settings and Configuration; Filtering Device Overview; Accessing Device Properties

10.2 Errors in the SMARadio-Controlled Socket
States of the Lower Horizontal LED
LED status Cause and corrective measure
Flashing blue The BLUETOOTH connection to the SunnyHomeManager is criti-
cal.
Corrective measures:
• If possible, select a different mounting location.
• If no other mounting location is possible, use an
SMABLUETOOTHRepeater or an additional SMAradio-
controlled socket. This will extend the wireless range of your
BLUETOOTH network.
Off There is no BLUETOOTH connection between the SMAradio-con-
trolled socket and the SunnyHomeManager.
Corrective measures:
• Ensure that the SunnyHomeManager is supplied with voltage
(see Section7.6, page48).
• Ensure that the same NetID is configured on the SMAradio-
controlled socket and the SunnyHomeManager (see
Section5.2.3, page35).
• If possible, select a different mounting location.
• If no other mounting location is possible, use an
SMABLUETOOTHRepeater or an additional SMAradio-
controlled socket. This will extend the wireless range of your
BLUETOOTH network.
10 Troubleshooting
SMA Solar Technology AG
Installation ManualHoMan-IA-en-2066