SMA sunny home manager - Plugwise Radio-Controlled Socket Set for the SMA Smart Home

All LEDs of the LED Display
Figure 11: Display of the NetIDs
LED status Operating mode/status of the SMAradio-controlled socket
0, 2 to 9 and A to F NetID configuration mode and display of the configured NetID
4.3 Plugwise Radio-Controlled Socket Set for the SMA
Smart Home
Plugwise offers various house-automation sets. The set must contain at least the following Plugwise
components in order that the Plugwise radio-controlled sockets can be used in the SMA Smart
Home:
• 1 x Plugwise Stretch
• 1 x Plugwise radio-controlled socket "Circle+" (as coordinator for the ZigBee network)
• Up to 22 additional Plugwise radio-controlled sockets "Circle"
The Plugwise radio-controlled switch "Stealth" can also be ordered through the Plugwise sales
channels (www.plugwise.com). Loads can be connected to the Plugwise radio-controlled switch via
cable securely to the spring-cage terminals. The Plugwise radio-controlled switch is added to the
system via the Plugwise app and then appears automatically on the page Device Overview >
Overview of New Devices in the PV system in SunnyPortal. If required, additional radio-
controlled sockets can be purchased in sets or individually through the Plugwise sales channels.
Plugwise Stretch
The Plugwise Stretch is necessary for establishing the connection between the
SunnyHomeManager and the Plugwise radio-controlled sockets/switches. The Plugwise Stretch
controls the Plugwise devices via a wireless ZigBee connection. The Plugwise Stretch can be
integrated into the local network either via cable or WLAN.
4 Product Description
SMA Solar Technology AG
Installation ManualHoMan-IA-en-2032