SMA sunny home manager - Mounting the Sunny Home Manager on the Top-Hat Rail

3. Drill the holes (diameter: 6mm).
4. Insert the screw anchors into the holes.
5. Screw in the screws leaving approximately 6mm protruding from the wall.
6. Hook the SunnyHomeManager onto the
screws. Ensure that the heads of the screws are
engaged in the holes at the back of the
SunnyHomeManager.
6.4.2 Mounting the SunnyHomeManager on the Top-Hat Rail
Requirement:
☐ The top-hat rail must be firmly attached to the wall.
Procedure:
1. Press the SunnyHomeManager with the upper
retainers into the upper edge of the top-hat rail.
2. Hook the lower retainers into the lower edge of
the top-hat rail.
6 Mounting
SMA Solar Technology AG
Installation ManualHoMan-IA-en-2040