SMA sunny home manager - Accessing the Sunny Home Manager Interface

Controlling the Plugwise radio-controlled sockets via the Plugwise app
Plugwise radio-controlled sockets that are managed in the energy management system can not
be controlled via the Plugwise app. Only the power data of the Plugwise radio-controlled
sockets is displayed in the Plugwise app. If you would like to control the Plugwise radio-
controlled sockets via the Plugwise app, you must remove these devices from your
SunnyHomeManager system. The Plugwise radio-controlled sockets will then be displayed in
the Plugwise app without the locked symbol and can again be operated via the Plugwise app.
Device Overview
Unlike the SMA radio-controlled socket, the Plugwise radio-controlled socket does not have an LED
display or touch key for operation. It is therefore only possible to operate the Plugwise radio-
controlled socket via the SunnyHomeManager or the SunnyPortal app and to switch it on and off
manually.
Figure 6: Plugwise radio-controlled socket (example representation; dependent on country-specific version)
Position Designation
A Pin connector
B Plug
4.2.3 SMARadio-Controlled Socket
The function and behavior of the SMA radio-controlled socket and the Plugwise radio-controlled
socket are identical.
Improvement of the Wireless Connection between BLUETOOTH Devices
If the distance between BLUETOOTH devices is too great or obstructions interfere with the
BLUETOOTH connection, the SMAradio-controlled socket can be used as a repeater. This bridges
the dead zone.
4 Product Description
SMA Solar Technology AG
Installation Manual 29HoMan-IA-en-20