SMA sunny home manager - Device Overview and Management

2. Keep tapping the touch key until the upper horizontal LED displays the desired operating
mode:
Operating mode LED status
On Glowing green
Automatic Off (subsequently flashing orange)
Off Glowing orange
3. To adopt the operating mode, wait approximately one second. During this time, do not tap the
touch key.
☑ After approximately twoseconds, the SMAradio-controlled socket audibly switches to
the selected operating mode.
8.4.2 Setting the Operating Mode of the PlugwiseRadio-
Controlled Socket
You can only set the operating mode of Plugwise radio-controlled sockets that are managed by the
SunnyHomeManager via Sunny Portal or the Sunny Portal app (see the user manual "Sunny
Home Manager in Sunny Portal").
Plugwise radio-controlled sockets that are managed by the SunnyHomeManager can not be
configured via the Plugwise app. Only the data of these Plugwise radio-controlled sockets will be
displayed. If you would like to manage certain Plugwise radio-controlled sockets via the Plugwise
app, you must remove the desired Plugwise radio-controlled sockets from your
SunnyHomeManager system (see the user manual "Sunny Home Manager in Sunny Portal".
8 Commissioning
SMA Solar Technology AG
Installation Manual 59HoMan-IA-en-20