Device type From inverter
firmware version
STP5000TL-20 2.00.15.R
STP6000TL-20
STP7000TL-20
STP8000TL-20
STP9000TL-20
Inverters with BLUETOOTHPiggy-Back excluding inverters of type WB
(WindyBoy)
02.00.06.R**
Inverters with SMASpeedwire/Webconnect data module excluding in-
verters of type WB (WindyBoy)
1.00.00.R**
Inverters with SMASpeedwire/WebconnectPiggy-Back excluding invert-
ers of type WB (WindyBoy)
SunnyIsland6.0H-11 with SMASpeedwire data module for SunnyIs-
land from firmware version1.00.00.R
All
SunnyIsland8.0H-11 with SMASpeedwire data module for SunnyIs-
land from firmware version1.00.00.R
SunnyIsland 3.0M-11 with SMASpeedwire data module SunnyIsland
from firmware version1.00.00.R
SunnyIsland4.4M-11 with SMASpeedwire data module for SunnyIs-
land from firmware version1.00.00.R
SunnyBackup2200 with BLUETOOTHPiggy-BackOff-Grid from
firmware version01.01.4.R
* This firmware version is the minimum requirement for the function Limiting of the active power feed-
in.
** A list of these inverters can be found in the BLUETOOTHPiggy-Back documentation. The inverters
supporting the function "Limitation of active power feed-in" are listed in the Planning Guidelines
"PowerReducerBox – Compatibility List".
No support for the SunnyBoy240 and the SunnyMultigate
The SunnyBoy240 and the SunnyMultigate are not intended for use in
SunnyHomeManager systems. Although the SunnyHomeManager can detect the
SunnyMultigate, use of the SunnyHomeManager for the configuration of this inverter is not
recommended. SMASolarTechnologyAG does not accept liability for missing or incorrect
data and any yield losses that may result.
2 Safety
SMA Solar Technology AG
Installation ManualHoMan-IA-en-2014