SMA sunny home manager - Page 37

Procedure:
1.
Deactivating the BLUETOOTH communication of the inverters
If an inverter communicates with the SunnyHomeManager simultaneously via
Speedwire/WLAN and BLUETOOTH, data recording errors will result.
• For inverters with BLUETOOTHinterface, set NetID0 (see inverter- or
BLUETOOTHPiggy-Back documentation). This deactivates communication via
BLUETOOTH.
2. Connect the Speedwire devices to the router / network switch (see Speedwire device
documentation). Make sure that the distance to the mounting location of the
SunnyHomeManager is not too great, as the SunnyHomeManager must later be connected
to the same router/network switch.
5 Mounting and Commissioning Preparations
SMA Solar Technology AG
Installation Manual 37HoMan-IA-en-20