Procedure:
1. Unplug the SMAradio-controlled socket from the outlet and then plug it back in.
☑ The upper horizontal LED is glowing red for approximately ten seconds.
2. As soon as the vertical LEDs are glowing green, press and hold the touch key for five seconds.
Do not release the key until the upper horizontal LED is glowing red.
☑ The NetID is reset to 0.
☑ The measured values are reset.
☑ The system password is reset to the standard password of 1111 for the user group Installer.
10 Troubleshooting
SMA Solar Technology AG
Installation ManualHoMan-IA-en-2078
To Next Page
Loading...
