SMART 330 - Page 30

g To convert the image
1. Open a SMARTDocumentCamera window.
2.
Press Additional Settings .
3. Do any of the following:
o
Select Rotate 180 Degrees to rotate the image 180°.
o
Select Convert to Color to convert a black and white image to color.
o
Select Convert to Black and White to convert a color image to black and white.
o
Select Convert to Positive to convert a negative image to positive.
o
Select Convert to Negative to convert a positive image to negative.
g To use Microscope mode
1. Open a SMARTDocumentCamera window.
2.
Press Additional Settings , and then select Start Microscope Mode.
3.
When you’re done, press Additional Settings , and then select Stop Microscope Mode.
g To take a screen capture
1. Open a SMARTDocumentCamera window.
2.
Press Capture and Close to insert a screen capture on the current page and close the
window.
OR
Press Capture to New Page to insert a screen capture on a new page and keep the
window open.
g To take a series of screen captures
1. Open a SMARTDocumentCamera window.
2.
Press Capture with Time-Lapse , and then select a period of time. (For example, if you
want to take a screen capture every 15 seconds, select 15 Seconds.)
3. Press when you’re done.
C H A P T E R 3
Using your SMARTDocumentCamera
24