SMART Board 6000S Series Installation And Maintenance Guide

Chapter 1 Welcome
smarttech.com/kb/171414 15
Temperature and humidity sensors
The display features integrated temperature and humidity sensors that can provide
real-time measurement and recording of the display’s environmental conditions. This
data is easily accessible using the temperature and humidity app in the display’s App
library.
Note
Temperature and humidity sensors are available only when iQ is enabled.
Microphone array
This feature is available only on the SMART Board 6000S (V3) and SMART Board 6000S (V3)
Pro models.
Note
The SMART Board 6400S (V3) Pro models do not include a microphone array.
You can use the display’s built-in microphone array while using a conferencing app on the display. The
microphone array provides improved sound detection. You can also use the display’s built-in
microphone array in place of a connected computer’s microphone.
NFC sign in
The display allows you to sign in to your SMART Account using NFC (near field communication): just tap
your SMART ID card on the screen and enter a PIN. This feature helps you save time signing in to your
account without typing your username and password.
Note
NFC sign in is available only on SMART Board 6000S series displays with iQ. Only SMART ID cards are
supported.
Mounting hardware
The display comes with a WM-SBID-200 wall mount, which you can use to mount the display on a wall
(see Installing the display on a wall on page22).
You can also mount the display on a wall or mobile stand (see Accessories on page18).

SMART Board 6000S Series Specifications

General

Resolution	4K UHD (3840 x 2160)
Screen Sizes	65", 75", 86"
Aspect Ratio	16:9
Touch Points	20
Brightness	350 cd/m²
Contrast Ratio	4000:1
Response Time	8 ms
Wall Mountable	Yes
Connectivity	HDMI, USB, VGA, DisplayPort
Operating System	Android