Chapter 2 Installing the display
smarttech.com/kb/171414 30
3.
Select your preferred language, and then tap Next.
4.
Select your country, and then tap Next.
5.
Select your time zone, and then tap Next.
6.
Set the date, and then tap Next.
7.
Set the time, and then tap Next.
8.
Name the display, and then tap Next.
9.
If the display isn’t using a wired network connection, select a wireless network, and then tap Next.
Important
The display needs an internet connection for downloading and installing important updates. Ask
the network administrator to confirm that the network has been correctly configured for the iQ
experience. For more information about network configuration, see Connecting a SMART display
with the iQ experience to a network.
Note
If an internet connection is not available for downloading and installing important updates, see
Updating system software manually
on page50.
10.
Select the apps you want to appear in the Apps Library, and then tap Next.
Tip
To change which apps appear in the Apps Library, see
Launcher
on page61.
11.
Tap Finish.
The
Welcome
screen appears.
About energy saving modes
The display features a number of energy saving modes:
l
Networked standby: a low power state in which the display quickly turns on when the Power button
is pressed or the proximity sensor detects people in the room.
l
Standby: a very low power state in which the display turns on when the Power button is pressed.
The proximity sensor doesn’t turn the display on in this power state.
Standby is the default energy saving mode for displays set to a location within the EU. Elsewhere,
networked standby is the default energy saving mode. You can select the display’s energy saving mode
in Settings > System Settings > Power > Standby (Shutdown) or Settings > System Settings > Power >
Networked Standby (Sleep).
To Next Page
Loading...
Need help?
General
