Chapter 2 Installing the display
smarttech.com/kb/171414 27
If you mount multiple displays side by side, you can connect them with RS-232 cables to turn on, turn off,
and otherwise operate all of the displays from the first display’s convenience panel.
The leftmost display (when viewed from the front) is the first display:
Important
Use only standard RS-232 cables. Do not use null modem cables.
Note
For more information about using RS-232 cables for remote management, see
Appendix D Managing
SMARTBoard 6000S (C)or 6000S series displays using RS-232
on page82.
Installing the display on a stand
If you want to move the display from place to place or if it’s not possible to install the display on a wall,
you can install it on a stand.
Using SMART mobile stands
SMART mobile stands are designed for SMART interactive displays. They are height-adjustable. Some
models include integrated speakers, a locking cabinet to secure equipment, and casters that swivel and
lock for easy movement.
For more information about SMART mobile stands, see smarttech.com/accessories.
Using a third-party stand
For information on selecting and using a third-party stand, see Installing your SMARTBoard 6000S on a
stand.
To Next Page
Loading...
Need help?
General
