SMART Board 6000S Series Installation And Maintenance Guide

Appendix A Adjusting settings
smarttech.com/kb/171414 67
Option Values Function Notes User or system
setting
Advanced HDMISettings HDMI 1.0
HDMI 2.0
HDMI 3.0
OPS
VGA
Sets the HDMI version, HDP pulse
width, and MHL setup delay for each
HDMIinput.
You can also
enable or disable
strictly
conformant
HDMIInput
DDCSDA timing
and forbid or
allow HDCP2.2
with older
receivers.
System
Go to the Input Lobby
when there is no signal
On
Off
When enabled, show the input
previews when there is no signal.
[N/A] System
Audio
Audio In
These options are available for SMART Board 6000S (V3) models only.
Volume Range slider Sets the microphone’s volume. [N/A] System
Built-in microphone On
Off
Enables or disables the display’s
built-in microphone. The default is
on.
[N/A] System
Noise suppression On
Off
Enables or disables the noise
suppression filter for the display’s
built-in microphone. The default is
on.
Enable the noise
suppression filter
to reduce
background
noise when using
the display’s
built-in
microphone.
System
Audio Out
Volume Range slider Sets the volume from the speakers [N/A] System
Built-in Speakers On
Off
Enables or disables the display’s
internal speakers.
When analog
speakers are
connected to the
display, the
display’s internal
speakers are
disabled
automatically.
System
Audio Properties

SMART Board 6000S Series Specifications

General

Resolution	4K UHD (3840 x 2160)
Screen Sizes	65", 75", 86"
Aspect Ratio	16:9
Touch Points	20
Brightness	350 cd/m²
Contrast Ratio	4000:1
Response Time	8 ms
Wall Mountable	Yes
Connectivity	HDMI, USB, VGA, DisplayPort
Operating System	Android