SMART Board GX Series Installation And Maintenance Guide

Chapter 2
Installing the display
smarttech.com/kb/171744 24
Connecting power and turning on the display for the
first time
To connect the display to power
Connect the supplied power cable from the AC power inlet on the back of the display to a power
outlet.
NOTE
Refer to the display’s specifications for power requirements and power consumption information
(see More information on page15).
To turn on and set up the display for the first time
IMPORTANT
Install the OPS PC module before you turn the display on.

SMART Board GX Series Specifications

General

Brand	SMART
Model	Board GX Series
Category	Monitor
Language	English