SMART Board GX Series Installation And Maintenance Guide

Appendix A
Adjusting display settings
smarttech.com/kb/171744 75
Exiting the display’s settings
Press the Home button on the front control panel.
Network settings
Option Values Function Notes
Wi-Fi
Wi-Fi switch
Enable
Disable
Enables or disables connecting to a
network wirelessly.
Turn on Wi-Fi to discover networks.
Network list
[N/A] Shows information about available Wi-
Fi networks.
The display will automatically
reconnect to a previously connected
network unless removed using Forget.
Install certificates
[N/A] Installs an SSL certificate for wireless
network access.
[N/A]
Add network
SSID
Security
Password
Manually connect to a hidden wireless
network.
For the network you're connecting to:
l Add the SSID
l Select a security protocol
l Enter the password
Ethernet
Connect
Enable
Disable
Enables or disables connecting to a
network.
[N/A]
IP settings
[N/A] Enables configuration of the display’s
IP settings.
Displays the IP address DHCP
(automatic) or manual (static).
DHCP
Enable
Disable
Enables the display to obtain an
IPaddress automatically
[N/A]
Static
Enable
Disable
Enables the display to be assigned a
static IPaddress
Use the display’s pop-up keyboard to
type the IP address, Gateway address,
Network prefix length, and DNS server
address.
MAC address
[N/A] Shows information about the network
the display is connected to.
[N/A]
IP address
[N/A] Displays the unique address of the
Ethernet adapter.
[N/A]
Proxy Settings
None
Manual
[N/A] When proxy is set to manual, additional
settings are displayed to enter the
Host name of the proxy server, Port of
proxy server, and Do not apply proxy
to the following websites:

SMART Board GX Series Specifications

General

Brand	SMART
Model	Board GX Series
Category	Monitor
Language	English