Chapter 4
smarttech.com/kb/171744 53
Chapter 4: Maintaining the display
Turning the display on or off 53
Cleaning and maintaining the display 54
Checking the display installation 54
Cleaning the screen 55
Cleaning the touch sensors 55
Maintaining ventilation 56
Preventing condensation 56
Replacing the pens 56
Removing and transporting the display 57
Updating system firmware 58
Applying a firmware update 58
Updating system firmware manually 58
With proper maintenance, the display will provide years of use.
Turning the display on or off
In most situations, you can put the display in Standby mode when not using it following the instructions in
SMART Board GX series interactive displays user guide (smarttech.com/kb/171745).
In some situations, such as when you transport the display or clean its screen, you need to turn the display
off. You can turn it back on after.
To turn the display off
1.
Press the Power button on the front control panel or the remote control for five seconds and wait
for the status light to stop blinking.
To Next Page
Loading...
