Chapter 4
Maintaining the display
smarttech.com/kb/171744 57
Removing and transporting the display
On occasion, you might need to remove the display from its current wall mount and transport it to another
location.
To remove the display safely, use two or more trained installers.
WARNING
l Do not attempt to move the display by yourself. The display is very heavy.
l Do not move the display by connecting a rope or wire to the handles on the back. The display can
fall and cause injury and product damage.
IMPORTANT
Follow the documentation included with any SMART or third-party mounting hardware.
To remove the display
1. Turn off any connected computers.
2. Turn off the display (see Turning the display on or off on page53).
3. Flick the switch beside the AC power inlet to the OFF(O) position.
4. Remove all accessible cables and connectors.
5. Remove any modules from the OPS slot.
6. Lift the display from its mounting location.
WARNING
Do not place the display on a sloping or unstable cart, stand, or table. The display could fall, resulting
in injury and severe product damage.
CAUTION
Do not leave the display face up, face down or upside down, for an extended period. This could
cause permanent damage to the screen.
7. Remove the mounting brackets.
To transport the display
See Moving the display to the installation site on page16.
To Next Page
Loading...
Need help?
General