SMART Board GX Series - Page 93

Appendix C
Managing the display using RS-232
smarttech.com/kb/171744 93
Function Set command Get command Response
Mute k01sQ[Value]<CR>
Where [Value] is one of the
following:
l 0 (off)
l 1 (on)
k01gg000<CR> k01rg[Value]<CR>
Where [Value] is one of the
following:
l 000 (off)
l 001 (on)
Number k01sT[Value]<CR>
Where [Value] is one of the
following:
l
0–009
NOTE
Number value is set by
entering a number
between 0 and 009.
[N/A] [N/A]
Key k01sU[Value]<CR>
Where [Value] is one of the
following:
l 000 (up)
l 001 (down)
l 002 (left)
l 003 (right)
[N/A] [N/A]
Freeze k01s_[Value]<CR>
Where [Value] is one of the
following:
l 000 (off)
l 001 (on)
[N/A] [N/A]
Device name [N/A] k01gr000<CR> k01rr[Value]<CR>
Where [Value] is one of the
following with “XX”
representing the separate
characters for a device name:
l
1XX
l
2XX
l
3XX