SMC Networks HRR012-A*-20 Series - Page 92

HRX-OM-W002-A
Chapter 5 Display and Setting of Various Functions
5.5 Advanced setting mode HRR Series
5-44
Switching of the notice for maintenance
29. Press the [▼] key. Displays screen for setting the switching of the notice for
maintenance. Alarm AL28: Notice for maintenance is generated.
Operation for alarm AL28: Notice for maintenance can be selected.
Set value
Contents
Initial value
OFF
Alarm is not generated. Only ”X” is displayed
when a notice for maintenance is generated.
○
WRN
Operation of this product will continue when the
alarm occurs.
―
FLT
Operation of this product will stop when the
alarm occurs.
―
Notice for maintenance
MANT ⇒ ALARM(Alternately displayed)