SMC Networks HRSH Series User Manual

HRX-OM-Q026
Chapter 5 Display and Setting of Various Functions
HRSH Series 5.20 Alarm Buzzer Sound Setting
5-47
5.20 Alarm Buzzer Sound Setting
5.20.1 Alarm buzzer sound setting
This sets whether a warning sound is made or not when alarm signal is
output.
The default setting is buzzer sound ON.
5.20.2 Setting/checking of alarm buzzer sound
The table below shows the set item of the alarm buzzer sound and the
default setting.
Table 5.20-1 Set item for alarm buzzer sound
Display
Item
Contents
Default
Alarm buzzer
sound
Sets alarm buzzer sound ON/OFF.
ON
1. Press and hold the [MENU] key for approximately 2 seconds.
Repeat pressing the key until the alarm buzzer setting screen [ ] appears on the digital
display.
Setting/Checking: Alarm buzzer sound
2. Select alarm buzzer sound ON or OFF with [▲] key or [▼] key, and press [SEL] key to
enter.
Table 5.20-2 Alarm buzzer sound setting
Set value
Explanation
Default
Alarm buzzer sound OFF
Alarm buzzer sound ON
✓
3. Press the [MENU] key once.
Return to the main display (which shows the circulating fluid temperature).
PV
SV
PV
SV
PV
SV
PV
SV
PV
SV
Press
and hold
[MENU]
key.
Press
and hold
[MENU]
key.
Press
and hold
[MENU]
key.

SMC Networks HRSH Series Specifications

General

Brand	SMC Networks
Model	HRSH Series
Category	Chiller
Language	English