SMC Networks HRSH Series User Manual

HRX-OM-Q026
Chapter 5 Display and Setting of Various Functions
HRSH Series 5.10 Operation Restoration after Power Failure
5-27
5.10 Operation Restoration after Power Failure
5.10.1 Operation restoration function after power failure
When the power supply is cut due to power failure, etc., this function restarts
the operation when the power supply restores, retaining the conditions
before the power cut.
[When communication is being used]
If the communication mode is DIO REMOTE or SERIAL mode (MODBUS),
this function does not operate. DIO REMOTE and SERIAL mode (MODBUS)
operation/stop signals have priority.
The [ ] light turns ON when the operation restoration function is set. The
default setting of this function is “OFF”. (AL41 “Power stoppage” alarm does
not occur.)

SMC Networks HRSH Series Specifications

General

Brand	SMC Networks
Model	HRSH Series
Category	Chiller
Language	English