HRX-OM-Q026
Chapter 2 Name and Function of Parts
2.2 Name and Function of Parts HRSH Series
2-2
2.2 Name and Function of Parts
2.2.1 HRSH-A- (Air cooled type)
Fig. 2-2 Names of the parts (This drawing shows “HRSH250-A-20”.)
Table 2-1: Accessory list
2 pcs.
(English 1 pc. /Japanese 1 pc.)
2 copies
(English 1 copy/Japanese 1
copy)
For HRSH-AF-
G thread adapter set (HRS-EP014)
For HRSH-AN-
NPT thread adapter set (HRS-EP013)
Note) The anchor brackets (including M8 bolts) are used for fixation with the skid when this product is packed. The anchor bolts are
not attached.
Circulating fluid
outlet port Rc1
Circulating fluid
return port Rc1
Automatic fluid
fill port Rc1/2
Signal cable entry
(Grommet with membrane)
Tank drain port
Rc3/4 (closed by a
ball valve)
Power cable entry
(Grommet with membrane)
Option K
[Fluid fill port]
Option B
[Earth leakage breaker]
Inside the panel
Power terminal
(Inside the
panel)
Signal connectors
(Inside the panel)
HRSH-A-20-B1
HRSH***-A*-20-S,
HRSH-A-40-
To Next Page
Loading...
Need help?
General
