Snom D375 - When the Phone Is Active

26
D375 | Snom 370 User Manual Getting to Know Your Phone
Function key line
The symbols on the buttons in this line depict the functions that can be activated by pressing the
function key underneath the respective symbol. See "Appendix 1 - Display Symbols" on page 79 for
a complete list. The factory defaults are:
Directory. See "Directories" on page 36.
Call lists (missed, received, and dialed calls). See "Call lists" on page 54.
Forwarding all calls (on/o). See "Call forwarding" on page 56 and
70.
Phone's IP address and URL of snom's web page
Displaying all currently available status messages. This key is available whenever a
status message becomes newly available even when a dierent function is mapped
onto the far-right context-sensitive function key underneath the display.
Press the key to display the status messages; press DEL to delete the highlighted
status message. When all messages have been deleted, the symbol will disappear
from the function key line; the message in the status line will also disappear.
If you have mapped (programmed) a dierent function onto the key, that function is
now available on this key again. If you have mapped the "Status messages" function
onto the key, the key will remain blank until a new status message becomes available
or until a reboot when all current status messages will be displayed anew.
When the phone is active
The display will inform you of any activity the phone is engaged in. This information is presented in
the form of text or symbols or both.
Info bar: Name of current activity and time.
Context area: Depending on the activity, this area will contain symbols (incoming call ringing,
outgoing call ringing, etc.) and text like the phone number calling, the extension number being called,
conference partners, etc.
Status line
In editing modes (i.e., when dialing or editing directory entries), the current editing mode (i.e.,
numerals, small letters, or capital letters) is shown preceding the status message, if any (see ):
Function key line
Depending on the current activity of the phone, the key function key line will present various functions
that can be activated by pressing the function key underneath the respective symbol. See "Appendix
1 - Display Symbols" on page 79 for a list of available functions.