57
D375 | Snom 370 User Manual Using the Phone
The setting will change to "1 Enable forwarding [Yes]", indicating that call forwarding is now active.
Press
for two seconds to return to the idle screen.
The status line and the status info screen will indicate that call forwarding is turned on and what
number calls will be forwarded to.
Note: Forwarding when busy and after timeout are indicated in the status line, which
can display only one message at a time. When both are active at the same time, only
"Forward when busy" will be displayed. If there are other status messages with a higher
priority than "Forward when Busy" (e.g., firmware update available, reboot required,
waiting for call completion, etc.), they will take precedence over the call forwarding
indication.
Press
to show status info with all current status messages, including call
forwarding.
all calls:
"i":
when busy
or after
timeout:
Turning on forwarding of all calls with a programmable function key
If the function key
is not available when the display is in idle mode, you can make it available
on the Function Keys page of the phone's web interface. For further information see "Configuring the
function keys" on page 58 .
1. Press
. The display will show the "Target when Forwarding" screen.
2. If no forwarding number has been set or if it needs to be changed, make the necessary entries.
3. Press
.
Turning o forwarding of all calls: Press
.
Turning o call forwarding
Forward all Forward when busy Forward after timeout
Press
Press
2 Call Features
2 Call Features
2 Call Features
Press
1 Call Forwarding
1 Call Forwarding
1 Call Forwarding
Press
1 Forward All
2 Forward when Busy
3 Forward after Timeout
Press
1 Enable forwarding [Yes]
1 Enable forwarding [Yes]
1 Enable forwarding [Yes]
The menu item changes to "1 Enable forwarding [No]". Press
for two seconds to return to the idle
screen.
Turning o forwarding of all calls with the programmable function key: Press
.
To Next Page
Loading...
