Snom D375 - Call Completion; Call Waiting

72
D375 | Snom 370 User Manual Customizing the Phone Settings
Call completion
On Snom phones call completion means that when a called number is busy or not available, your
phone will call you back as soon as the dialed number is not busy anymore or available again. The
factory default setting is "o".
Note: This function depends on whether it is available in your network or not.
Changing the setting to turn it on:
On the phone
> 2 Call Features > 2 Outgoing Calls > 4 Call Completion [On]/[O]. Press to change
setting from On to O and vice versa.
On the web interface
Open the phone's web interface > Advanced > Behavior > Phone Behavior > Call completion > .
Call waiting
Default setting: When in a call, another incoming call coming in is announced visually in the status
line and acoustically by the sound of a double beep. See "Call waiting" on page 49 on how to use
this feature. Available settings:
◦ On: Visual and acoustic announcement of calls waiting
◦ Visual only: Visual announcement of calls waiting in the status line
◦ Ringer: Acoustic announcement by double beeps
◦ O: No announcement; callers hear the busy signal
Starting with FW 8.7.5.9, call waiting can be set independently for each identity on the phone's web
user interface. If you use the phone to change the setting, it will apply to the current outgoing identity.
On the phone
1. Press > 2 Call Features > 3 Incoming Calls > 2 Call Waiting.
2. Select setting with .
3. Press
to save.