Snom D375 - Call forwarding; Forward All; Forward when Busy; Forward after Timeout

56
D375 | Snom 370 User Manual Using the Phone
Deactivating rejection of anonymous calls:
1. Press
.
2. Press 2 Call Features.
3. Press 3 Incoming Calls.
4. Press 1 to change setting "1 Reject anonymous" from [Yes] to [No].
5. Press
for two seconds to return to the idle screen.
Call forwarding
The phone can be set to forward incoming calls, either always or under certain conditions. The
settings can be done on the phone and on the web interface. For further information on using the web
interface for these settings, see "Call forwarding" on page 70.
Forward All: Forwarding all incoming calls to the number of the phone, extension, or mailbox
specified as this function’s target.
As the default setting, the function key
in the function key line turns forwarding of all calls on
and o, but you can also map the function onto another function key or use the settings menu as
shown in the table, below.
Forward when Busy: Forwarding calls ringing while phone is busy to the number of the phone,
extension, or mailbox specified as this function’s target.
Forward after Timeout: When a call starts ringing, the phone will wait for the number of seconds
specified in the setting "Call forwarding time". If the call is not accepted by the end of this time period,
it is forwarded to the number of the phone, extension, or mailbox specified as this function’s target.
Making/changing the settings on the phone and turning on call forwarding
Forward all Forward when busy Forward after timeout
Press
Press
2 Call Features
2 Call Features
2 Call Features
Press
1 Call Forwarding
1 Call Forwarding
1 Call Forwarding
Press
1 Forward All
2 Forward when Busy
3 Forward after Timeout
Press
2 Target when forwarding
2 Target when forwarding
2 Target when forwarding
Type phone number phone number phone number
Press
Press
3 Call Forwarding time
Type number of seconds
Press
Press
1 Enable forwarding [No] 1 Enable forwarding [No] 1 Enable forwarding [No]