Snom D385 - Active Calls; Hold; One Call on Hold

57
D385 User Manual Using the Phone
Fig. 5 Fig. 6
When a call is waiting, you have the following options:
• Press the blinking line key of the call waiting to put your current call on hold and to accept the
second call without knowing who is calling (Fig. 3). This option is available only when there is a
free line key available at the time the call comes in.
• Press the function key underneath
/ (Fig. 1) to put the Call waiting screen on the display
(Fig. 2); you will see the caller ID on-screen if it is being transmitted.
◦ Press
to reject the call waiting. The caller will hear the busy signal.
◦ Press
to accept the second call and put your current call on hold.
◦ Press
/ to return to the Connected screen with your current connection.
Note: Pressing
and will aect the call shown on the display, i.e., your current
connection in Fig. 1 and 3, the call waiting in Fig. 2 and 5, or the call on hold in Fig. 4.
◦ If there is more than one call waiting (Fig. 5 and 6), press the keys
/ or /
/ / , respectively, to bring them on-screen and to return to the connected
call.
• If you do not wish to accept the waiting call, you can:
◦ ignore the announcement. If you have set call forwarding when busy, the call will be
transferred to that phone.
◦ reject the incoming call by putting the Call waiting screen on the display and pressing
.
The caller hears the busy signal. Pressing
for three seconds will also put the caller on the
"Deny" list of the phone's directory. Future calls from this number will not ring on the phone;
the caller hears the busy signal. For more information on the "Deny" list and how to remove
entries from it, see "Contact Types" on page 43.
Active calls
Hold
One call on hold
Press
to put the ongoing call on hold. Held calls are indicated threefold:
◦ By the text on the display.
(1/2) (2/2)