Snom D385 - Call Waiting

87
D385 User Manual Customizing the Phone Settings
Call waiting
Default setting: When in a call, another call coming in is announced visually in the status line and
acoustically by a double beep. See "Call waiting" on page 56 on how to use this feature. Available
settings:
◦ On: Visual and acoustic announcement of calls waiting
◦ Visual only: Visual announcement of calls waiting in the status line
◦ Ringer: Acoustic announcement by double beeps
◦ O: No announcement; callers hear the busy signal
Call waiting can be set independently for each identity on the phone's web user interface. If you use
the phone to change the setting, it will apply to the current outgoing identity.
Setting on the phone
The setting is applied to the outgoing identity at the time it is saved. If you want to change the setting
for other identities, select each one as the outgoing identity in turn and repeat the steps.
1. Press
> Call Features > Incoming Calls > Call Waiting.
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig.5 Fig. 6
◦ To turn call waiting on and o, select Call waiting and press (Fig. 1). When call waiting has
been turned o, Indicator is no longer available in the menu (Fig. 2).
◦ To change the way calls waiting are announced, select Indicator and press
. The Indicator
menu appears (Fig. 3). Select a setting and press
to save the change and return to the
Call waiting menu. The Indicator setting now indicates the new setting, for example, if you
changed the default setting of "visual & ringer" (Fig. 5) to "visual only" (Fig. 6).
2. Press
briefly to return to the previous menu, press for two seconds to return to the idle
screen.