Snom D385 - Customizing the Phone Settings; Identities;Accounts; Configuring and Editing Identity;Account

78
D385 User Manual Customizing the Phone Settings
Customizing the phone settings
See "The phone's web interface" on page 37 on how to open the phone’s web interface, how the
web interface works, and how to change the settings. See "User mode/administrator mode" on page
40 on the dierence between administrator and user mode.
If you have access to administrator mode, but do not consider yourself to be an expert on SIP and SIP
phones, we recommend that you do not change any of the technical settings since this may adversely
aect the phone’s performance or put it out of order altogether.
If you want more information on a web interface setting, click on the radio button with the question
mark
that you see to the right of each item. It links to a page on Snom’s Wiki with detailed
information about that particular item.
On customizing the function key settings, see the chapter "Configuring the function keys" on page
69.
Note: Any changes you make on the web interface will not take eect until you click
on "Apply" and "Save". Changes will be lost if you open another page or tab of the web
interface or if you close the web interface without first clicking on Apply and Save.
Identities/accounts
The phone supports up to four accounts or "phone numbers" with one or more providers or within
an oce or organization network. On Snom phones these accounts or phone numbers are called
"identities".
Note: If your phone is part of an oce network, you may need to contact your
administrator to configure new or change existing identities, as this can only be done
when the phone is running in administrator mode and when the PBX settings allow it.
See "Initializing and registering the phone" on page 15 for more information on required input data.
Configuring and editing identity/account
In admin mode only.
On the phone
Press
> Identity > Edit identity > Hotdesking > select a free identity with and enter
account and registrar. If you want or need to enter more data, use
> Identity > Edit identity >
Edit identity > select a free identity with or its number in the menu. Available menu items:
1 Active [Yes]
2 Displayname
3 Account
4 Password
5 Registrar
6 Outbound Proxy
7 Authentication User Name
8 Mailbox