Snom D385 - Call Completion

86
D385 User Manual Customizing the Phone Settings
2. Type the phone number in the "Target" text field. Type each number the way it needs to be
dialed by the phone, without spaces or punctuation between the digits.
3. Click on Apply and Save.
• Forwarding incoming calls when they are not answered:
1. Open Configuration Identity > Features tab > Call Forwarding > Timeout.
2. Type the number of seconds into the text field of "Timeout (sec)". If an incoming call hasn't
been answered when the time has elapsed, the call will be forwarded to the phone number
entered as target.
3. Type the phone number in the "Target" text field. Type each number the way it needs to be
dialed by the phone, without spaces or punctuation between the digits.
4. Click on Apply and Save.
Turning call forwarding on
1. Web interface > Configuration Identity > Features tab > Call Forwarding.
2. Click "On" after the forwarding event (Always, Busy, Timeout).
3. Click on Apply and Save.
Turning call forwarding o
1. Web interface > Configuration Identity > Features tab > Call Forwarding.
2. Click on "O" after the forwarding event (Always, Busy, Timeout).
3. Click on Apply and Save.
Call completion
On Snom phones call completion means that when a called number is busy or not available, your
phone will call you back as soon as the dialed number is not busy anymore or available again. The
factory default setting is "o".
Note: This function must be supported by your VoIP provider and/or your PBX.
On the phone
1. Press > Call Features > Outgoing Calls > Call Completion.
2. Select the setting and press
to change it from o to on and vice versa.
3. Press
briefly to return to the previous menu, press for two seconds to return to the idle
screen.
On the web interface
Open the phone's web interface > Advanced Settings page > Behavior tab > Phone Behavior section >
Call completion: Click the radio button on or o.