socomec ATyS Series Installation And Operating Manual

ATyStM - 542931D - SOCOMEC
27EN
13.5. Automatic mode
Close the cover to enter automatic mode. Make sure that the changeover switch is in automatic mode (AUT LED lit).
13.5.1. Sealable Auto/Manual cover
Auto/Manu mode can be protected by sealing the standard Auto/Manu cover as shown.
13.6. Possible actions
Once in automatic mode, it is possible to:
• Run a source
I
/ source loss sequence
II
,
• start a restoration sequence source
I
/ source
II
.
Source
I
return:
source
II
Loss of source
I
/
source
II
AUTOMATIC MODE

socomec ATyS Series Specifications

General

Type	Automatic Transfer Switch (ATS)
Transfer Mode	Open or closed transition
Control	Automatic, Manual, Remote
Standards	IEC 60947-6-1
Communication	Modbus, Ethernet
Protection Degree	IP20
Poles	3 or 4 poles