socomec ATyS Series Installation And Operating Manual

ATyStM - 542931D - SOCOMEC
6 EN
2.2. The ATyS M Range Key Features
Selecting the right ATyS M will depend on the application, the functionality required as well as the nature of the installation
in which the ATyS M will be installed. Below is an outline product selection chart listing the key features of each product to
help you select the right ATyS M for your needs.
ATyS d M ATyS t M ATyS g M ATyS p M
160 A
40 A
OPEN TRANSITION MOTORISED CHANGEOVER SWITCH
DUAL POWER SUPPLY
BUILT-IN ATS CONTROLLER
COMMUNICATION*
* Specific version. ** Return to zero without external energy source.
TRIPPING**
A product for virtually all power changeover applications from 40 to 160 A
 Network / Genset
 Genset / Genset
 Network / Network
Applications with an
External ATS Control
 Network / Genset

Network / Network
ATyS d M
GS
UPS
 Network / Network
Building applications
ATyS p M
ATyS t M
UPS
ATyS p M
Non-critical
loads
Non-critical
loads
Critical
loads
 Network / Genset
Genset Applications for
Standby Power
UPS
ATyS g M
Non-critical
loads
Critical
loads
Critical
loads

socomec ATyS Series Specifications

General

Type	Automatic Transfer Switch (ATS)
Transfer Mode	Open or closed transition
Control	Automatic, Manual, Remote
Standards	IEC 60947-6-1
Communication	Modbus, Ethernet
Protection Degree	IP20
Poles	3 or 4 poles