socomec ATyS Series - 2. INTRODUCTION

ATyStM - 542931D - SOCOMEC
7EN
2.2.1. Selection guide
Six ratings 40 / 63 / 80 / 100 / 125 / 160 A
ATyS d M ATyS t M ATyS g M ATyS p M
APPLICATIONS
Normal / Backup without automatic controller
•
Normal / Backup with built-in automatic controller
• • •
Stable positions
• • • •
Load changeover
•
FUNCTIONS
POWER SUPPLY
External
•
Integrated
• • •
OPERATION
Backup manual operation of the 3 positions
• • • •
Electrical (dry contact) control of positions I, 0 and II
• •*
Automatic control of positions I, 0 and II
• • •
Return to 0 position feature upon loss of source
•
MONITORING
3 voltages on networks I and II
• • •
Frequency on networks I and II
• • •
Phase rotation on networks I and II
•
Asymmetry of networks I and II
•
AUTOMATIC CONTROLLER CONFIGURATION
By potentiometer and micro-switch
• •
By screen + keyboard
•
V
n
, F
n
, V threshold, F threshold
• • •
Driving with or without priority
• • •
Adjustable operating timers
• • •
Preset configuration
Control type (impulse or switch / contactor)
•
DISPLAY
Position, fully visualised breaking
• • • •
LED: source status, automatic mode, fault LED
• • •
LED: switch positions, supply, tests, control
•
V, F, timers, number of operations, last event
•
REMOTE CONTROL
Outputs
Generator start / stop order
• •
Product availability (not fault and not manual mode)
• •*
Source available
• •*
Programmable output (source, availability, fault)
•*
Inputs
Test on load
• •*
Retransfer
• •*
Automatic mode inhibit
• • •*
Position O order
• •*
Priority
• • •
Other programmable inputs
(test off-load, position control, etc.)
•*
Remote control
Human / Machine Interface (D10 and D20)
•
RS485 communication (MODBUS)
•**
* 3 inputs / 3 outputs (programmable).
** Product reference is different: communication by RS485 connection (MODBUS) allows up to 31 ATyS M to be connected to a PC or a PLC over 1500 m.