socomec ATyS Series Installation And Operating Manual

ATyStM - 542931D - SOCOMEC
28 EN
14. PREVENTATIVE MAINTENANCE
It is recommended to operate the product at least once a year.
I - O - II - O - I
Note: Maintenance should be planned carefully and carried out by qualied and authorised personnel. Consideration
of the critical level and application where the product is installed should form an essential and integral part of the
maintenance plan. Good engineering practice is imperative whilst all necessary precautions must be taken to ensure that
the intervention (whether directly or indirectly) remains safe in all aspects.
The use of any Megohmmeter is prohibited on this product as the connection terminals are intrinsically
connected to the sensing circuit.

socomec ATyS Series Specifications

General

Type	Automatic Transfer Switch (ATS)
Transfer Mode	Open or closed transition
Control	Automatic, Manual, Remote
Standards	IEC 60947-6-1
Communication	Modbus, Ethernet
Protection Degree	IP20
Poles	3 or 4 poles