SolaX Power X1-Hybrid G4 Series User Manual

9 Decommissioning
9.1 Removal of Inverters
Remove DC input line and AC output line of inverter.
Wait for at least 5 minutes to power off.
Remove all cable connections from the inverter.
Remove inverter from finger support the bracket.
Remove the bracket if necessary.
Store the inverter in a dry, temperature -40°C~70°C environment.
Pay attention to less than four inverter on each stack board during
storage and transportation.
9.2 Packing
Load the inverter into the original package if possible.
9.3 Storage and Transportation
9.4 Waste Disposal
If it is necessary to scrap the inverter or other related parts,
be sure to send the waste inverter and packaging materials
to the designated location for recycling by the relevant
department.
102
Decommisioning
If the original package can not be found, you can also use the
following requirements of the carton packaging:
Bearing capacity of more than 30kg.
Easy to carry.
Can completely seal the cover.
The XI-Hybrid G4 series hybrid inverters are transported, used and
operated under limited condition, such as environmental, electrical etc.
SolaX shall not be liable to provide the service, technical support or
compensation under conditions listed below, including but not limited
to:
10 Disclaimer
Inverter is damaged or broken by force majeure (such as earthquake,
flooding, thunderstorm, lighting, fire hazard, volcanic eruption etc).
Inverter's warranty is expired and doesn't buy extended warranty.
Can't provide the inverter's SN, warranty card or invoice.
Inverter is damaged by man-made cause.Inverter is used or operated
against any items in local policy.
Inverter's installation, configuration, commissioning doesn't follow the
requirements mentioned in this manual.
Inverter is installed, refitted or operated in improper ways mentioned
in this manual without authority from SolaX.
Inverter is installed, operated under improper environment or
electrical condition mentioned in this manual without authority from
SolaX.
Inverter is changed, updated or disassembled on hardware or
software without authority from SolaX.
Obtain the communication protocol from other illegal channels.
Build monitoring, control system without authority from SolaX.
Connect to other brands batteries without authority from SolaX.
SolaX will keep right to explain all the contents in this user manual.
103
Disclaimer

SolaX Power X1-Hybrid G4 Series Specifications

General

Brand	SolaX Power
Model	X1-Hybrid G4 Series
Category	Inverter
Language	English