Ø History Data
Setting
Setting
1)
2)
3)
4)
5)
History Data
EPS
E_Feedin
E_USERDEF
On-grid
Error Log
Output Today 0.0 KWh
Output Total 0.0 KWh
Input Today 0.0 KWh
Input Total 0.0 KWh
On-grid
90
91
Ø Parallel Status
All 3
Slaver1 O
Slaver2 X
Slaver3 O
Slaver4 X
Slaver5 X
Slaver6 X
Slaver7 X
Slaver8 X
Slaver9 X
Parallel Status
Status shows on the screen when paralleling.
4 ) On-grid
Here you can see the voltage, current, frequency, and power of the
grid.
5 ) EPS
Here you can see the inverter of voltage, current, frequency and
power.
6) Meter/CT
Here you can see the data showing the meter or the CT.
On-grid A
Ua 0.0V
Ia 0.0A
PaOut 0 W
On-grid B
Ub 0.0V
Ib 0.0A
PbOut 0 W
On-grid C
Uc 0.0V
Ic 0.0A
PcOut 0 W
Grid Frenquency
Fa 0.00Hz
Fb 0.00Hz
Fc 0.00Hz
PaS 0VA
PbS 0VA
PcS 0VA
EPS_Spower
Ua 0.0V
Ia 0.0A
PaActive 0W
EPS A
Ub 0.0V
Ib 0.0A
PbActive 0W
EPS B
Uc 0.0V
Ic 0.0A
PcActive 0W
EPS C
Freq
Frequency
0.00Hz
Meter/CT
Pfeedin A
Pfeedin B
Pfeedin C
P_USERDEF A
P_USERDEF B
P_USERDEF C
The history data contains five pieces of information: on-grid power
of the inverter, EPS power generation, power of the meter /CT and
error Error logs.
Press up and down to select, press Enter to confirm selection, and
press ESC to return to the menu.
1 ) On-grid
Here is a record of the power capacity of the inverter connected to
the grid today and the total.
2 ) EPS
Here you can see the EPS output of the inverter today and the total
output.
To Next Page
Loading...
