EasyManuals Logo

SolaX Power X3-Hybrid Series User Manual

SolaX Power X3-Hybrid Series
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
05
04
SafetySafety
Strictly follow relevant safety specifications for product installation
and testing. During installation, operation or maintenance, please
read carefully and follow the instructions and precautions on the
inverter or user manual. If the operation is incorrect, it may cause
personal and property losses. Please keep the user manual properly
after use.
This inverter can only use the accessories sold and recommended by
our company, otherwise it may cause fire, electric shock or
casualties. Without the authorization of our company, you may not
open the inverter cover or replace the inverter parts, otherwise the
warranty promise of the inverter will be invalid.
The use and operation of the inverter must be carried out in
accordance with the instructions in this manual, otherwise this
protection will fail and the warranty of the inverter will also fail.
During working, the inverter surface temperature may exceed 60 , °C
please make sure the inverter cools down before touching, and
make sure children can not touch.
When exposed to sunlight, photovoltaic arrays generate dangerous
high DC voltages. Please follow our instructions, otherwise it will be
life-threatening.
All DC and AC power sources must be disconnected from the
inverter for at least 5 minutes before any wiring or electrical
operation is performed on the inverter to ensure complete isolation
of the inverter and avoid electric shock.
Caution!
Caution indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
Note!
Note provides tips that are valuable for the optimal
operation of our product.
Danger!
Danger to life due to high voltages in the inverter!
The personnel responsible for the installation, electrical
connection, debugging, maintenance and fault
handling operation of this product need to be trained,
master the correct operation method, have the
corresponding electrician qualification and safety
operation knowledge.
Caution!
When the inverter is working, it is strictly forbidden to
touch the shell. The temperature of the shell is high and
there is a risk of scalding.
Caution!
Radiation may be harmful to health!
Do not stay for a long time and keep at least 20 cm away
from the inverter.
Note!
Ground PV system.
Finish PV modules and photovoltaic system grounding
in accordance with local requirements to achieve
optimal protection of systems and personnel.
Warning!
Ensure that the input DC voltage is below the inverter
limit. Excessive DC voltage and current may cause
permanent damage or other losses to the inverter,
which is not covered by the warranty.
Warning!
Risk of electric shock!
Warning!
The inverter can not be operated when it is running.
Warning!
Before performing maintenance, cleaning or operation
on the circuit connected to the inverter, authorized
maintenance personnel must first disconnect the AC
and DC power supplies of the inverter.

Other manuals for SolaX Power X3-Hybrid Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SolaX Power X3-Hybrid Series and is the answer not in the manual?

SolaX Power X3-Hybrid Series Specifications

General IconGeneral
Number of MPP Trackers2
ModelX3-Hybrid Series
PhaseThree Phase
Communication InterfacesRS485
Battery CompatibilityLithium-Ion
Grid Frequency50Hz / 60Hz
Operating Temperature-25 ~ +60 °C

Related product manuals