Nucleus
2
User Guide Page 29
Managing Profiles
The Profiles are all stored on the SD card plugged into the rear of Nucleus
2
, not the computer the Remote is running on.
Profiles are however easily copied, renamed, deleted and backed up using the browser as well as being physically
transferable from one unit to another if required.
Deleting Profiles
T
o delete a Profile, click on Edit Profile to bring up the Profile Editor pop-
u
p, select the Profile which you wish to delete, and click Delete.
C
lick OK in the warning pop-up which appears, and after a moment the
P
rofile will disappear from the list in the pop-up. Click OK to exit the
P
rofile Editor.
Renaming Profiles
To rename a Profile, press Edit Profile to bring up the Profile Editor pop-up and select the
Profile which you wish to rename.
Click on Rename to bring up the Rename Profile pop-up. Type a new name for the Profile into
the pop-up and click OK. The Profile’s name will change in the Profile list in the Profile Editor.
Backing up Profiles
To back up a Profile or export it for use elsewhere, click on Edit Profile to bring up the Profile Editor popup, select the
Profile which you wish to back up, and click Backup. In the pop-up which appears, edit the name and destination of the
file if necessary, and click on Save. Your Profile will be exported as a compressed
.zip
file.
Restoring Profiles
To restore a Profile from back-up or import a Profile created using another Nucleus
2
Remote, click on Edit Profile to bring
up the Profile Editor popup and click Restore. In the pop-up which appears, locate the Profile file (a compressed
.zip
file) that you wish to restore and click on Open. The restored Profile will appear in the Profile list.
If the Profile name already exists the restored filename will be appended with number to distinguish it from the
existing Profile of the same name. You can rename the Profile as described above.
To Next Page
Loading...
Need help?
General