Need help?Do you have a question about the Solid State Logic Nucleus2 and is the answer not in the manual?
General| Rotary Encoders | 8 |
|---|---|
| Talkback | Yes |
| Transport Controls | Yes |
| Jog/Shuttle Wheel | Yes |
| Phantom Power | Yes |
| USB | USB 2.0 |
| Built-in Monitor Control | Yes |
| Build | Metal chassis |
| Type | Controller |
| Faders | 8 |
| Fader Type | Touch-sensitive |
| Display | LCD |
| Audio Interface | 10x10 USB audio interface |
| Number of Preamps | 2 |
| MIDI I/O | MIDI In/Out/Thru ports |
| Software | SSL Nucleus Control Software |
| Compatibility | Pro Tools, Logic, Cubase/Nuendo, Ableton Live |
| Channel Controls | 8 channel strips |
| Connectivity | USB, MIDI |
| Power Supply | External power supply |
Labels and text formatting used throughout the manual.
Definitions of terms related to DAW control and Nucleus² operations.
Information on manual accuracy and where to get assistance.
Describes the channel strip layout and mode switch functions on the Nucleus² control surface.
Explains the function of V-Pots and V-Sel switches for parameter control.
Details the function and display of the scribble strips for channel information.
Explains connecting Nucleus² to DAWs using a Dante network for audio and control.
Connecting Nucleus² to DAWs using proprietary soundcards via S/PDIF or analogue I/O.
Using Nucleus²'s digital (SPDIF) and analogue I/O for connections with soundcards.
Connecting Nucleus² to multiple DAW computers simultaneously.
Steps for installing Nucleus² software and drivers on Mac systems.
Steps for installing Nucleus² software and drivers on Windows systems.
Instructions for installing the optional Dante Virtual Soundcard application.
Guide to installing the Dante Controller software for network audio management.
Installing Nucleus² Remote and ipMIDI driver for configuration and MIDI communication.
Details of the physical audio and data ports on the Nucleus² back panel.
Setting up network wiring and assigning IP addresses for direct or DHCP connections.
Connecting to multiple computers and understanding the internal network architecture.
Setting up ipMIDI for MIDI communication and mapping ports to DAW layers.
Guide to connecting the Nucleus² Remote software to the Nucleus² console.
Navigating Remote tabs and selecting DAW layers for configuration.
Setting up DAW control protocols and profiles for different DAWs.
Procedures for creating, managing, and backing up custom profiles.
Configuring soft keys, menus, and DAW commands for personalized control.
Configuring transport master, jog wheel, and automation display settings.
Ensuring correct DAW layer and overview of soft key customization.
Managing channels, faders, metering, track arming, and automation modes.
Using V-Pots, V-Sels, transport, navigation, and master controls for DAW interaction.
Customizing User 1 and User 2 soft key sets for specific workflows.
Details on the input section, combi connectors, and input controls.
Managing main monitor and headphone levels, including blend and mono settings.
Using Mix mode, talkback, and understanding meter sources for audio processing.
Chart detailing transport and utility function assignments across different DAWs.
To Next Page
