There are four modes (Please refer to the following table) can be chosen for this function and
many parameters can be configured according to the requirement of the local grid company.
Procedure:
Step 1：Tap “Active power settings” to enter to the next page.
Step 2：Tap “Overfrequency response settings” to enter to the next page.
Step 3：Tap the drop-down menu to choose the mode of this function.
Step 4：Configure the parameters and tap “Save”.
8.5.3 Active power reduction at overfrequency P(f)
EN50549-1
AS/NZS4777.2:2015
NZ AS/NZS4777.2:2020
TOR Erzeuger Typ A V1.1
BR PORTARIA No. 140
BR NBR 16149:2013
C10/11:2019
AU AS/NZS4777.2:2020 A
AU AS/NZS4777.2:2020 C
AU AS/NZS4777.2:2020 B
Austria
Belgium
Brazil
Step 1 Step 2
UM0035_ASW05-12kH-T2-T3_EN_V01_0523
To Next Page
Loading...
